Power Inverter

DC12V 24V TO AC 220V 150W MINI inverter Booster transformer plate DIY inverter module Battery DC12V boost AC220V

Product parameters:

Power: 150 w

Input: DC12V OR DC24V (Please select the corresponding input voltage version when ordering.

Output: AC 0-110V-172V-200V-220V Static current: about 0.08A

Output waveform: high frequency square wave Output frequency: about 20KHz

Protection: without any protection

Precautions:

1. This board is high frequency square wave AC output, so the general perceptual electrical appliances are not brought!!(such as: motor, electric fan, coil transformer and so on are not brought) In addition: simple resistance-capacity step-down small appliances, cheap resistance-capacity step-down LED lamps may not be used

2. When loading electronic products (LED light, mobile phone charger, DVD set top box, WIFA).The output should be connected in series with a quick recovery diode or low voltage gear such as 110V 172V

3. It is recommended to increase the heat sink or add a fan to strengthen the heat dissipation when the load is large and the time is long!!

4. Positive and negative input power supply can not be reversed.In addition, the power supply and power cord should be large enough current

5. Because there is no protection for the output overload and short circuit.

6. The output is high frequency square wave AC voltage, many general multimeters will not measure or measure the display value is low or high (is not correct, not the actual voltage. Can be safely used) Special remind: load is suggested in our electronic products the board output string of a high frequency diode rectifier dc output, because a lot of electronic products of this kind of switch power supply electric rectifier parts to save cost is to use general rectifier tube, if in the “high frequency ac output” will lead to use electrical appliances in the rectifier diode breakdown short circuit heat damage sharply. Eventually, the inverter board is burned out.